Dell PowerEdge C8000 - Manual (Page 278)

278 Updating Firmware Images and Monitoring the PDU Power Status
Viewing or Changing the FCB Configuration Information
The FCB configuration information is stored in the FCB board’s internal
EEPROM. The FCB configuration file is a text (TXT) file. You must use
TFTP server to retrieve the configuration data and then use Notepad or a text
editor to view or change the configuration data.
For example, a configuration data should have the following information:
Configuring the SNMP Traps
1 Import the FCB configuration data.
2 Use a Notepad or text editor to edit the configuration data.
3 Enter an IP address in the appropriate Trap Destination field.
4 Set the SNMP read community string in SNMP RD COMMUNITY STR.
By default, the SNMP read community string is public.
5 Set the SMP read-write community string in SNMP RW COMMUNITY
STR. By default, the SNMP read-write community string is private.
6 Save the file.
7 Use the TFTP server software to upload the configuration file.
CONNECT.TYPE=STATIC/DHCP
IP=192.168.0.120
NETMASK=255.255.255.0
GATEWAY=192.168.0.1
TRAP.DESTINATION1=0.0.0.0
TRAP.DESTINATION2=0.0.0.0
TRAP.DESTINATION3=0.0.0.0
TRAP.DESTINATION4=0.0.0.0
TRAP.DESTINATION5=0.0.0.0
SNMP.RD.COMMUNITY.STR=public
SNMP.RW.COMMUNITY.STR=private
POWERCAPPING.R=3
POWERCAPPING.W_DELTA=20
POWERCAPPING.K_CNT=3