Dell PowerEdge C8000 - Manual (Page 97)

Using the System Setup Program 97
SATA Port 2
(Auto default)
When set to off, turns off the 3rd Serial ATA drive
controller.
When set to auto, enables BIOS support for the 3rd Serial
ATA drive controller (enabled if present, POST error if not
present).
SATA Port 3
(Auto default)
When set to off, turns off the 4th Serial ATA drive
controller.
When set to auto, enables BIOS support for the 4th Serial
ATA drive controller (enabled if present, POST error if not
present).
SATA Port 4
(Auto default)
When set to off, turns off the 5th Serial ATA drive
controller.
When set to auto, enables BIOS support for the 5th Serial
ATA drive controller (enabled if present, POST error if not
present).
SATA Port 5
(Auto default)
When set to off, turns off the 6th Serial ATA drive
controller.
When set to auto, enables BIOS support for the 5th Serial
ATA drive controller (enabled if present, POST error if not
present).
Power Saving Features
(Auto default)
Enables or disables the feature that allows SATA hard-
drives to initiate link power management transitions.
HDD Security Erase
(Disabled default)
Enables or disables the hard-drive security freeze lock
feature.
Option Description