Dell PowerEdge C8000 - Manual (Page 79)

Using the System Setup Program 79
CPU Power Capping
(P-State 0 default)
Select a processor performance state (P-state). Options are
[P-State 0], [P-State 1], [P-State 2], [P-State 3], and
[P-state 4].
NOTE: This option is enabled when Power Management is
set to OS Control mode.
Chassis Power
Management
Press <Enter> to set chassis power management.
This option indicates the different power management
options that control the system power consumption by
processor throttling and power capping.
Energy Efficient Policy
(Balanced default)
Select a power policy option.
• Max Performance: Sets the processors at the highest
performance state at all times.
• Balanced: Offers full performance and saves power by
reducing system power consumption during periods of
inactivity.
• Low Power: Use different processor power saving modes
(C-states) to reduce system power consumption.
NOTE: This option works when the OS does not support
power management control of the processor.
Option Description