Dell PowerEdge C8000 - Manual (Page 219)

Installing System Components 219
Installing a PDU Power Supply
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Align the new power supply module with the power supply bay.
See Figure 3-21.
2 Slide the power supply module into the bay until it is fully seated.
3 Connect the power cable to the power supply. Verify that the indicator on
the front of the power supply lights. See Figure 3-21.