Dell PowerEdge C8000 - Manual (Page 210)

210 Installing System Components
3 Disconnect the front panel board cable. See Figure 3-15.
4 Remove the front panel board from the enclosure. See Figure 3-15.
Figure 3-15. Removing and Installing the Front Panel Board
Installing the Front Panel Board
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Attach the new front panel board to its enclosure standoffs. See
Figure 3-15.
2 Connect the front panel board cable to the board. See Figure 3-15.
3 Position the front panel board cover over the board. See Figure 3-14
4 Replace the two screws securing the front panel board cover to the
enclosure. See Figure 3-14.
1 front panel board 2 front panel board cable
1
2