Dell PowerEdge C8000 - Manual (Page 162)

162 Using the System Setup Program
FCB SNMP MIB
Table 2-22. FCB SNMP MIB
Category Object Name Read/Write Value Type Operation
FW Safe
Boot FW Note
Common Status read-only values:
ok, error,
safeBoot
v v Firmware Status
FW Version read-only string v Firmware Version
(OP code)
Safe Image
FW Version read-only string v v Firmware Version
(Safe Boot code)
Asset Tag read-write string v Asset Tag, max string
length is 16 characters
Reset read-write value: start v v Firmware will reset
once this field is set
Server IP read-write IpAddress v v TFTP server IP
File Name read-write string v v max string length is
100 characters
Chassis
Identify read-write integer v Chassis Identification
Initiate
Download read-write value: start v Initiate download
Last Update
Status read-only Values:
na,
successfully,
error,
imageError,
start,
downloadIn
Progress,
download
Successfully,
download
Failed,
upgradeIn
Progress
v v Last update status,
firmware will check
header (CRC23) and
image (MD5) before
update, if checksum is
incorrect, this file will
be set as imageError.