Dell PowerEdge C8000 - Manual (Page 175)

Using the System Setup Program 175
PSUs
Table Number Of
Psus read-only integer v Number of PSU
PSUIndex not-
accessible
integer v PSU index
PSUStatus read-only values:
ok, error, na,
acloss,
bootLoader
v PSU status
PSU
Firmware
Version read-only string v PSU firmware version
PSU Serial
Number read-only string v PSU serial number
PSU Power
State read-only values:
on/off
v PSU power state
PSU Power
Good read-only values: ok,
error
v PSU power good
PSU Power
Capacity read-only integer v PSU power capacity,
Unit:W
PSU Power
Consumption read-only integer v PSU power
consumption,
Unit:W
PSU Voltage read-only integer v PSU voltage,
Unit:mV
PSU Current read-only integer v PSU current,
Unit:mA
PSU
Temperature read-only integer v PSU temperature,
Unit:degrees C
PSU Fan
Speed read-only integer v PSU fan speed,
Unit:rpm
Table 2-24. PMC SNMP MIB
Category Object Name Read/Write Value Type Operation
FW Safe
Boot FW Note