Dell PowerEdge C8000 - Manual (Page 163)

Using the System Setup Program 163
FCB
Control fc Initiate
Upload read-write values:
FC/CPLD/
NetConfig
v v Initiate upload
power
Consumption read-only Integer v Power consumption
fcpsu
Configuration read-write values:
x1n1, x2n0
v PSU Configuration,
X1n1: X+N=1+1
X2n0: X+N=2+0
enable
Manual Fan
Control read-write values:
1/0
v Default is disabled (0)
manual Fan
Control Duty
Cycle read-write integer v Manual Fan Control
Duty Cycle, 0 - 100,
default 100
FCB
FansTable number Of
Fans read-only integer v Number of FAN
fan Index not-
accessible Fan Index
fan Status read-only values:
ok, error
v FAN Status
fan Speed Read-only integer v FAN Speed
sled Index not-
accessible v Sled Index
FCB
Sleds
Table sled Type read-only values:
ok, na,
storage,
dummy, psu
v Sled Type
psu Index not-
accessible v PSU Index
Table 2-22. FCB SNMP MIB
Category Object Name Read/Write Value Type Operation
FW Safe
Boot FW Note