Dell PowerEdge C8000 - Manual (Page 230)

230 Rack Mount Configuration
2 Secure the front of the enclosure to the rack posts with four 10-32 screws.
See Figure 4-6.
Figure 4-6. Securing the Enclosure
Replacing Sled Modules in the Server Enclosure
For instructions on replacing sled modules in the server enclosure, refer to the
following sections.
• "Installing a Double-Wide Sled Blank" on page 190
• "Installing a Single-Wide Sled Blank" on page 191
• "Installing a Compute Sled" on page 194
• "Installing a Storage Sled" on page 195
• "Installing a Power Sled" on page 200 (for server enclosure with internal
power source only)
1 10-32 screws (4)
1