Dell PowerEdge C8000 User Manual
Page 227
Advertising
Rack Mount Configuration
227
i
Align the stopping bracket to the back rack post and secure with the
three 10-32 screws. Apply 35 in-lbs of torque to the screws.
Figure 4-4. Installing the Stopping Bracket
4 Attach the right rail and stopping bracket to the rack.
Use the same procedure to install the right rail and stopping bracket to the
right rack posts.
NOTE:
To remove the rails, press and hold on the rail release button on the end
piece midpoint and unseat each rail.
1
stopping bracket
2
10-32 screws (3)
1
2
Advertising