Dell PowerEdge C8000 - Manual (Page 190)

190 Installing System Components
Sled Blank
CAUTION: To ensure proper airflow in the system, if a module is removed it
should be immediately replaced with another sled or sled blank.
Removing a Double-Wide Sled Blank
Squeeze and hold the release latches and slide the blank out of the enclosure.
See Figure 3-2.
Figure 3-2. Removing and Installing a Double-Wide Sled Blank
Installing a Double-Wide Sled Blank
Hold the blank with the guide rail facing forward. Slide the blank into the
enclosure until it is fully seated and the release latches snap into place.
See Figure 3-2.
1 release latches (2) 2 double-wide sled blank
1
2