Connecting the power cable to the, Server enclosure with external power, Source – Dell PowerEdge C8000 User Manual
Page 238
Advertising
238
Rack Mount Configuration
Connecting the Power Cable to the Server Enclosure with External
Power Source
WARNING:
Make sure power is turned off on all devices before making
connections.
1 On the back of the server enclosure, connect the power cable to the DC
power socket. See Figure 4-14.
2 Tighten the two center screws on the cable to secure the connection.
Figure 4-14. Connecting the Power Cable to the Server Enclosure with External Power
Source
3 Plug the other end of the power cables into a separate power source such as
a PDU. For instructions on how to connect the power cables to the rack
PDU, see "Connecting the Server Enclosure to a Rack PDU" on page 239.
1
power cable
2
screws (2)
3
DC power socket
1
2
3
Advertising