Dell PowerEdge C8000 - Manual (Page 239)

Rack Mount Configuration 239
Connecting the Server Enclosure to a Rack PDU
WARNING: Do not connect or disconnect power cables to the PDU device while
the PDU is energized. Turn off the PDU breaker switches to avoid potentially
serious or fatal electrical shock. Move the PDU A, B, and C breaker switches to
the "OFF" position.
1 Unlock the cable cover. See Figure 4-15.
2 Rotate the cover back and away from the PDU. See Figure 4-15.
Figure 4-15. Opening the PDU Cover
3 Depending on the type of power cable used, connect the server enclosure
power cable to the PDU power bus bar or the power sockets.
For connecting the power cables to the PDU’s front power socket, go to
step 6.
1 cable cover 2 lock
1
2