Connecting the pdu to the network – Dell PowerEdge C8000 User Manual
Page 243
Advertising
Rack Mount Configuration
243
Connecting the PDU to the Network
1 Install the power management controller (PMC) board into the PDU.
a
Unpack the PMC kit.
b
Slide the PMC board into the PMC tray. See Figure 4-19.
c
Secure the PMC board to the PMC tray with the four screws.
Figure 4-19. Installing the Power Management Controller Board
1
power management controller (PMC) board 2
screws (4)
3
PMC tray
1
2
3
Advertising