Dell 3115cn Color Laser Printer - Manual (Page 116)

6.
Turn on the multifunction printer. 7.
Print a system settings page to verify that the additional print memory is installed correctly.
Press until >SETUP appears, and then press . a.
Press until >Reports appears, and then press . b.
System Settings is displayed. Press . c.
8.
The system settings page is printed.
Verify the capacity of the installed memory listed in the system settings under General . d.
If the memory capacity has not increased, turn off the multifunction printer, unplug the power
cable, and reinstall the memory card.
If you installed the additional print memory after installing the printer driver, update your driver by
following the instructions for the operating system you are using. If the multifunction printer is on a
network, update the driver for each client. 9.
When Using PCL Driver
Microsoft ® Windows Vista ®
Click Start Control Panel Hardware and Sound Printers . 1.
Right-click the multifunction printer and select Properties . 2.
Click the Options tab, and then select Get Information from Printer . 3.
Click Apply , and then click OK . 4.
Close the Printers dialog box 5.