Dell 3115cn Color Laser Printer - Manual (Page 295)

Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document feeder glass.
For details about loading a document, see "Loading an Original Document". 1.
Press until >COPY appears, and then press . 2.
Press until Collated appears. 3.
Press to select Collated, and then press . 4.
If necessary, customize the copy settings including the number of copies, contrast, and image quality.
See "
Setting Copy Options ".
5.
Press Start to begin copying.
For the document loaded on the document feeder glass, the display asks if you want to load another
page. Press to select Yes or No, and then press .
6.
If you select Yes, press to select Continue or Cancel, and then press . 7.
Changing the Default Settings
The Copy menu options, including contrast, and image quality can be set to the most frequently used
modes. When you copy a document, the default settings are used unless they are changed by using the
corresponding buttons on the operator panel.
NOTE: While you set copy options, pressing Cancel cancels the changed settings and returns to the
default status.
To create your own default settings:
Press until >COPY appears, and then press . 1.
Press until >Copy Defaults appears, and then press . 2.
Press until the desired menu item appears. 3.
Press to change the setting, and then press . 4.
Repeat steps 3 to 4, as needed. 5.
To return to the standby mode, press Cancel. 6.