Dell 3115cn Color Laser Printer - Manual (Page 236)

* 3 This mode is available only when firmware version 200706291103 or later and network (MPC) firmware
version 16.03 or later are installed. Since you cannot set IPsec in Windows Vista in this mode, use the Dell
Printer Configuration Web Tool. The Get Information from Printer function on the Options tab of
the printer driver is not available when using this mode.
Protocol
Purpose:
To enable or disable each item. The change becomes effective after the multifunction printer is turned off
and then on again.
Values:
LPD Enable*
Enables the LPD port.
Disable
Disables the LPD port.
Port9100 Enable*
Enables the Port9100 port.
Disable
Disables the Port9100 port.
IPP Enable*
Enables the IPP port.
Disable
Disables the IPP port.
SMB TCP/IP Enable*
Uses TCP/IP for SMB.
Disable
Does not use TCP/IP for SMB.
SMB NetBEUI Enable*
Uses NetBEUI for SMB.
Disable
Does not use Net BEUI for SMB.
FTP Enable*
Enables the FTP port.
Disable
Disables the FTP port.
NetWare IP Enable*
Enables the IP.
Disable
Disables the IP.