Dell 3115cn Color Laser Printer - Manual (Page 611)

/usr/local/dellbin3115/dellpsif -w width -l length -i indent -n login -h host accountfile
Function
If the first two characters of the input data are not %!, the dellpsif filter will convert it to the PostScript
language program that can be output according to the paper size. If the first two characters of the input data
are %!, it will be considered the PostScript language program and no data conversion will be executed. The
following control codes are interpreted for the conversion of input data.
LF
Line feed
FF
Form feed
TAB
8-column tab stop
BS
Backspace 1 character
The dellpsif is the hard link file of txt2ps2.
The dellpsif filter will be used as the IF filter specified by /etc/printcap.
The lpd daemon will specify the following command options and start up the dellpsif filter.
dellpsif -w width -l length -i indent -n login -h host accountfile
In addition, options usable by txt2ps2 can be specified by the
/usr/local/dellbin3115/.dellpsdefault3115
file. With this option, detailed control can be achieved.
However, if the input data are PostScript files, only the following options of txt2ps2 will become valid.
-d
Enables the short-edge binding feature. When it is specified, the printing direction or position will be
adjusted and both sides of the paper printed so that the shorter edge of the pages can be bound. This
option is available only when the optional duplexer is installed on the multifunction printer.
-D
Enables the long-edge binding feature. When it is specified, the printing direction or position will be
adjusted and both sides of the paper printed so that the longer edge of the pages can be bound. This
option is available only when the optional duplexer is installed on the multifunction printer.