Dell 3115cn Color Laser Printer - Manual (Page 349)

Press until >FAX appears, and then press . 1.
Press until >Fax Defaults appears, and then press . 2.
Press to select the desired menu item, and then press . 3.
When the option you want appears on the display, press to select the desired status or enter the
desired value using the number keypad.
4.
Press to save the selection. 5.
You can exit from the setup mode at any time by pressing Cancel . 6.
Using an Answering Machine
You can connect a telephone answering device (TAD) directly to the back of your multifunction printer as
shown above.
Set your multifunction printer to the Ans/FAX mode and set Auto Ans. Ans/FAX to specify the time for
the TAD.
When the TAD picks up the call, the multifunction printer monitors and takes the line if fax tones are
received and then starts receiving the fax.
If the answering device is off, the multifunction printer automatically goes into the Fax mode after a
predefined number of rings.
If you answer the call and hear fax tones, the multifunction printer will answer the fax call if you
Set OnHook to On (you can hear voice or fax tones from the remote machine), and then press Start
and hang up the receiver.
OR
Press the two-digit remote receive code and hang up the receiver.
Using a Computer Modem