Dell 3115cn Color Laser Printer - Manual (Page 344)

1.
2.
Press until >Speed Dial appears, and then press . 3.
Enter the three-digit speed dial number between 001 and 200, using the number keypad, and then
press .
4.
Enter the settings for Name, Phone Number, and Delete Dial by using , and number keys.
If a number is already stored in the location you chose, the display shows the number to allow you to
change it. To start over with another speed-dial number, press Back .
5.
Enter the number you want to store using the number keypad, and then press .
To insert a pause between numbers, press Pause . "-" appears on the display.
6.
To assign a name to the number, enter the name. For details about how to enter names, see "Using
the Number Keypad to Enter Characters ".
If you do not want to assign a name, skip this step. 7.
Press Back when the name appears correctly or without entering a name. 8.
To store more fax numbers, repeat steps 4 through 6.
To return to the standby mode, press Cancel . 9.
Sending a Fax Using a Speed Dial
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document feeder glass.
For details about loading a document, see "Loading an Original Document ". 1.
To enter the speed dial number do either of the following:
Press until >FAX appears, and then press . a.
Press until >Speed Dial appears. b.
Use the Keypad buttons to enter the three-digit speed dial number between 001 and 200, using
the number keypad, and then press .
The corresponding entry's name briefly displays. To confirm the name again, press .
c.
2.
Adjust the document resolution to suit your fax needs (see "Adjusting the Document Resolution ").
If you need to change the contrast, see "Lighter/Darker ". 3.
The document scans into the memory.
When the document is loaded on the document feeder glass, the LCD display asks if you want to send
another page. Press
to select Yes to add more documents or to select No to begin sending the fax
immediately, and then press .
4.
The fax number stored in the speed dial location is automatically dialed. The document is sent when
the remote fax machine answers. 5.