Dell 3115cn Color Laser Printer User Manual
Page 68
iv. Click the first column of Access List row 2 .
v. Enter "0.0.0.0 " in the Address field and "0.0.0.0 " in the Address Mask field.
vi. Select Permit .
vii. Click Apply New Settings .
Enabling and Disabling Printing from Network Addresses
c.
You can enable printing from the "192.168 " network address and disable printing from the "192.168.200 "
network address. However, the example below describes how to enable printing from the "192.168.200.10 "
IP address.
Procedures:
i. Click the first column of the Access List row 1 .
ii. Enter "192.168.200.10 " in the Address field and "255.255.255.255 " in the Address Mask
field.
iii. Select Permit .
iv. Click the first column of the Access List row 2 .
v. Enter "192.168.200.0 " in the Address field and "255.255.255.0 " in the Address Mask
field.
vi. Select Reject .
vii. Click the first column of the Access List row 3 .
viii. Enter "192.168.0.0 " in the Address field and "255.255.0.0 " in the Address Mask field.
ix. Select Permit .
x. Click Apply New Settings .
Other Features
The Other Features tab includes Set Password , Security , IPsec and Reset Print Server pages.
Set Password
Purpose:
To set or change the password that is required to access the printer setup parameters from the Dell Printer
Configuration Web Tool .
Set the password of the operator panel from Panel Settings in the Printer Settings . This page can also be
displayed by clicking Set Password in the Left Frame.
NOTE:
To restore the password to default (NULL), initialize the non-volatile memory (NVM).
Values: