Dell 3115cn Color Laser Printer - Manual (Page 35)

Power Saver
Mode2 Displays the status for the power saver mode 2.
Power Saver
Timer Mode 1 Displays the amount of time before the multifunction printer enters the power saver
timer mode 1 after it finishes a print job.
Power Saver
Timer Mode 2 Displays the amount of time before the multifunction printer enters the power saver
timer mode 2 after it finishes a print job.
Auto Reset Displays the amount of time before the setting is reset automatically.
Panel Select Tone Displays the selected tone for the panel.
Panel Alert Tone Displays the alert tone for the panel.
Machine Ready
Tone Displays the tone when the machine becomes ready.
Copy Job Tone Displays the tone when copying starts.
Non-Copy Job
Tone Displays the tone when copying is complete.
Fault Tone Displays the tone when an error occurs.
Alert Tone Specifies whether the multifunction printer sounds an alarm when an error occurs.
Out of Paper Tone Displays the tone when the paper runs out.
Low Toner Tone Displays the tone when the toner is low.
Auto Clear Alert
Tone Displays the tone when the jam is cleared.
Base Tone Displays the base tone.
All Tones Displays all types of tones.
Time-Out Specifies the amount of time the multifunction printer waits to receive additional
bytes of data from the computer. When this timeout expires, the print job is
canceled.
Panel Language Determines the language of the text on the operator panel screen.
Auto Log Print Specifies whether the multifunction printer outputs logs automatically.
Print ID Specifies a location where the user ID is printed.
Print Text Specifies whether the multifunction printer outputs PDL data, which is not supported
by the multifunction printer, as text when the multifunction printer receives it.
Banner Sheet
Insert Position Specifies the position of banner sheet.
Banner Sheet
Specify Tray Specifies the tray in which the banner sheet is loaded.