Dell 3115cn Color Laser Printer - Manual (Page 36)

RAM Disk Specifies whether to allocate memory to the RAM disk file system for the Secure
Print and Store Print features.
This item is only available when the 256 MB, or higher, optional memory card is
installed.
Substitute Tray Specifies whether or not to use another size paper when the paper that is loaded in
the specified tray does not match the paper size settings for the current job.
mm/inch Specifies the measurement unit on the operator panel screen as either mm or
inches.
Fax Activity Displays the status for printing the fax activity.
Fax Transmit Displays the status for printing the fax transmission.
Fax Broadcast Displays the status for printing the fax broadcast.
Protocol Monitor Displays the status for printing the protocol monitor.
Parallel Settings
Purpose:
To configure the parallel interface.
Values:
ECP Specifies the ECP communication mode of the parallel interface.
Adobe Protocol Specifies PostScript communication protocol for each interface.
Network Settings
Purpose:
To Specify the PostScript communication protocol for this multifunction printer.
Values:
Adobe Protocol Specifies PostScript communication protocol for each interface.
USB Settings
Purpose:
To change printer settings affecting a USB (Universal Serial Bus) port.
Values:
Adobe Protocol Specifies PostScript communication protocol for each interface.
PCL Settings
Purpose: