Dell 3115cn Color Laser Printer - Manual (Page 597)

/usr/local/dellbin3115/xwd2ps2 [-d] [-D] [-Itray-input] [-t] [-r] [-n] [-l=left,bottom] [-
s=width,height] [-S=width] [-E] [-Nc=copies] [-Cl] [-Hd=position:format] [-Hffont] [-MSI] [-
M=type] [-Mfo=mode] [-Pon] [-St=mode] [-Sp] [-Sb] [-Cm=mode] [-Pr=mode] [-Cc=mode] [-
Gc=mode] [-Sc=mode] [-Gg=mode] [-Ct] [-Br=mode] [-RGBc=mode] [-RGBPr=mode] [-RGBTp=mode] [-
Cb=cyan-low:cyan-middle:cyan-high:magenta-low:magenta-middle:magenta-high:yellow-low;yellow-
middle:yellow-high:black-low:black-middle:black-high] [-
Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password] [filename...]
Function
Reads XWD data, converts it to the PostScript language program and writes to standard output. If the
filename is not specified, the standard input will be taken as the command input. XWD files with a pixel
depth of 1, 4, 8, 24, and 32 bits can be specified.
There are three types of supported compression formats.
The visual class is Static Gray and the pixel is 1 bit.
The visual class is Pseudo Color and the pixel is 4 bits or 8 bit. The image format is Zpixmap.
The visual class is True Color and the pixel is 24 bits or 32 bit. The image format is Zpixmap.
xwd2ps2 takes filename as having been created in 72dpi and calculates the output size. Thus, to convert
XWD files created in other resolutions, specify the size option (-s, -S) explicitly for conversion.
Option
-d
Enables the short-edge binding feature. When it is specified, the printing direction or position will be
adjusted and both sides of the paper printed so that the shorter edge of the pages can be bound. This
option is available only when the optional duplexer is installed on the multifunction printer.
-D
Enables the long-edge binding feature. When it is specified, the printing direction or position will be
adjusted and both sides of the paper printed so that the longer edge of the pages can be bound. This
option is available only when the optional duplexer is installed on the multifunction printer.