Dell 3115cn Color Laser Printer - Manual (Page 326)

Auto Ans.
Ans/FAX The multifunction printer can share one telephone line with an answering machine. In this
mode, the multifunction printer will monitor the fax signal and pick up the line if there are
fax tones. If the phone communication in your country is serial, this mode is not available.
Line
Monitor You can specify the volume of the internal speaker.
Ring Tone
Volume You can specify the volume for the incoming faxes.
Line Type You can select the default line type.
· PSTN
· PBX
Dialing
Type You can select the dialing type.
· PB
· DP (10PPS)
· DP (20PPS)
DM
Prevention Using the DM Prevention feature, the system only accepts faxes from the remote stations
registered in the speed dial. This feature is useful for blocking any unwanted faxes.
Select Off to turn the feature off. Anybody can send you a fax.
Select On to turn the feature on.
Remote
Receive You can receive a fax by pressing the remote receive code on the external telephone after
picking up the handset of the telephone.
Remote Rcv
Tone You can specify the tone when Remote Receive is set to On .
Duplex
Print You can use duplex printing when you receive a fax. This option is available only when the
optional duplexer is installed on your multifunction printer.
Send
Header Prints the sender record at the head of the fax.
Select Off to turn this feature off.
Select On to turn this feature on.
Send
Header
Name Specifies the sender name in the sender report.
G3ID Contains your telephone number, which is printed at the top of each page sent from your
multifunction printer. This feature is available when you set Send Header to On .
Local Name Contains your name or company name, which is printed on the report sheet.
DRPD
Pattern Before using the Distinctive Ring Pattern Detection (DRPD) option, distinctive ring service
must be installed on your telephone line by the telephone company. After the telephone
company has provided a separate number for faxing with a distinctive ring pattern,
configure the fax setup to monitor for that specific ring pattern.
Forward
Settings You can set your multifunction printer to forward incoming faxes to another fax number
during a specified time period. When a fax arrives at your multifunction printer, it is stored
in the memory. Then, the multifunction printer dials the fax number that you have specified
and sends the fax.
Select Trans. at Error to forward the incoming faxes when an error occurs.