Dell 3115cn Color Laser Printer - Manual (Page 241)

Purpose:
To specify the number of redial attempts, 0-9. If you enter 0, the multifunction printer will not redial.
Int. of Redial
Purpose:
To automatically redial a remote fax machine if it was busy. Intervals from 1-15 minutes can be entered.
Ans Select
Purpose:
To select the default fax receiving mode.
Values:
TEL Mode Automatic fax reception is turned off. You can receive a fax by picking up the handset of the
external phone and then pressing the remote receive code, or by setting OnHook to On (you
can hear voice or fax tones from the remote machine) and then pressing Start.
FAX
Mode* A fax is automatically received.
TEL/FAX
Mode When the multifunction printer receive an incoming a fax, the external telephone rings for the
time specified in Auto Ans. TEL/FAX, and then the multifunction printer automatically receive
a fax. If incoming data is not a fax, the multifunction printer beeps from the internal speaker.
Ans/FAX
Mode The multifunction printer can share one telephone line with an answering machine. In this
mode, the multifunction printer will monitor the fax signal and pick up the line if there are fax
tones. If the phone communication in your country is serial, this mode is not available.
DRPD
Mode Before using the Distinctive Ring Pattern Detection (DRPD) option, distinctive ring service
must be installed on your telephone line by the telephone company. After the telephone
company has provided a separate number for faxing with a distinctive ring pattern, configure
the fax setup to monitor for that specific ring pattern.
Auto Answer Fax
Purpose:
To answer an incoming call and automatically go into the receive mode. You can specify the time for
incoming call of the external phone in 0-255 seconds.