Dell 3115cn Color Laser Printer - Manual (Page 154)

c.
d.
Step 2. Construct new wireless network environment for both computer
and multifunction printer (When wireless setting needs to be set to your
computer)
For Dynamic Host Configuration Protocol network:
Create wireless setting of your computer following the steps below: 1.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel . a.
Right-click Wireless Network Connection and select Properties . b.
Select the Wireless Networks tab. c.
Ensure that the check box for Use Windows to configure my wireless network settings is
checked. d.
NOTE: Ensure that you write down the current wireless computer settings in steps e and g so
that you can restore them later.
Click the Advanced button. e.
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box. f.
Click the Add button to display Wireless network properties . g.
In the Association tab, enter the following information and click OK . h.
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: checked
Click the Move up button to move the newly added SSID to the top of the list. i.
Click OK to close the Property dialog box. j.
NOTE: When your operating system is earlier than Windows 2000, create settings according to
the manual of the wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
Open Control Panel . a.
b.
c.