Advanced fax settings – Dell 3115cn Color Laser Printer User Manual

Page 327

Advertising
background image

Select Trans. Always to always forward the incoming faxes.
Select Not Trans. not to forward incoming faxes. You can set the fax number to which
faxes are forwarded. Then, you can enter the start time and/or the end time. The Print Local
Copy option allows you to set the multifunction printer to print the fax, if fax forwarding is
completed with no error.

Fwd.
Settings
Num

You can set the number of the multifunction printer to always forward all of the incoming
faxes to the specified destination.

Fwd. Set
Print

Prints all of the ongoing faxes when you can set the multifunction printer to always forward
the faxes to the specified destination.

Prefix Dial

You can select whether or not to add the prefix number when you send a fax.

Prefix Dial
Num

You can set a prefix dial number up to five digits. This number dials before any auto dial
number is started. It is useful for accessing the PABX exchange.

Discard
Size

When receiving a document as long as or longer than the paper installed in your
multifunction printer, you can set the multifunction printer to discard any excess at the
bottom of the page. If the received page is outside the margin you set, it will print on two
sheets of paper at the actual size. When the document is within the margin and the Auto
Reduction feature is turned on, the multifunction printer reduces the document to fit it onto
the appropriate sized paper and discard does not occur. If the Auto Reduction feature is
turned off or fails, the data within the margin will be discarded.

Color Fax

Set whether the multifunction printer sends and receives color faxes.

Extel Hook
Thresh

You can set the threshold value for the OnHook mode.

Country

You can select the country where the multifunction printer is used.

Fwd. Error
Print

Prints the document failed to transfer when Forward Set Print is set to Off .

NOTE:

Prefix Dial only supports the environment where you send a fax to send a fax to the external

line number. To use Prefix Dial, you must do the following from the operator panel.

Use

and

to select SETUP

Admin Menu

Fax Settings

Line Type . Select PBX , and then

press

.

1.

Use

and

to select SETUP

Admin Menu

Fax Settings

Prefix Dial . Select On , and then

press

.

2.

Use

and

to select SETUP

Admin Menu

Fax Settings

Prefix Dial Num . Enter a

maximum of five-digit prefix number from 0-9, *, and #.

3.

Advanced Fax Settings

NOTE:

The advanced fax settings are only meant for advanced users. Incorrect settings on the Dell

3115cn may damage the device.

Advertising