Operator panel, Power saver mode2 – Dell 3115cn Color Laser Printer User Manual
Page 82
Advertising
1 Cover
2 Document Guides
3 Document Feeder Tray
4 Document Feeder Glass
Operator Panel
For details on the operator panel, see "
Operator Panel
"
Power Saver Mode2
The scan lamp under the document feeder glass automatically turns off when it is not in actual use during a
preset period to reduce power consumption and extend the lamp life. The lamp automatically turns on and
the warm-up cycle begins whenever any key is pressed or the document cover is opened.
You can set the length of time for which the scan lamp waits after a scan job is completed before it switches
to the Power Saver Mode2.
Press
until >SETUP appears, and then press
.
1.
2.
Advertising