Dell 3115cn Color Laser Printer - Manual (Page 357)

on the network even when the protocol is not in use. This may slightly increase network traffic. To eliminate
unnecessary traffic, you can disable unused protocols.
Press until >SETUP appears, and then press . 1.
Press until >Admin Menu appears, and then press . 2.
Press until >Wired Net or >Wireless Net appears, and then press . 3.
Press until >Protocol appears, and then press . 4.
Press to select the desired settings, and then press .
Port9100
FTP
SNMP UDP
E-Mail Alert
EWS
5.
Configuring TCP/IP
Static Addressing: TCP/IP address is assigned manually by the system administrator.
Dynamic Addressing BOOTP/DHCP(default): TCP/IP address is assigned automatically by a DHCP or
BOOTP server on your network.
Static Addressing
To enter the TCP/IP address from your multifunction printer's operator panel, take the following steps:
Press until >SETUP appears, and then press . 1.
Press until >Admin Menu appears, and then press . 2.
Press until >Wired Net or >Wireless Net appears, and then press . 3.
Press until >TCP/IP appears, and then press . 4.
Press until >IP Address appears, and then press . 5.
An IP address consists of 4 bytes.