Dell 3115cn Color Laser Printer - Manual (Page 439)

When wireless infrastructure mode is set to the multifunction printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Select the setting that you send to the multifunction printer in the list in Preferred Network
group. f.
Click Move up to move the setting to the top of the list. g.
Click OK to close the Property dialog box. h.
NOTE: When your operating system is earlier than Windows 2000, create settings according to
the manual of the wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
Open Control Panel. a.
Select Network and Internet. b.
Select Network and Sharing Center. c.
Select Connect to a network. d.
Select the original setting from the network items listed in Connect to a network, and then
click Connect. e.
For Windows Server 2008:
Open Control Panel. a.
Select Network and Sharing Center. b.
Select Connect to a network. c.
Select the original setting from the network items listed in Connect to a network, and then
click Connect. d.
Step 2. Construct new wireless network environment for both computer
and multifunction printer (When wireless setting needs to be set to your
computer)
For Dynamic Host Configuration Protocol network:
Create wireless setting of your computer following the steps below: 1.
For Windows XP and Windows Server 2003:
a.