Dell 3115cn Color Laser Printer - Manual (Page 456)

1.
Cyan 20% Outputs cyan toner at 20% density on the whole area of the paper.
Magenta20% Outputs magenta toner at 20% density on the whole area of the paper.
Yellow20% Outputs yellow toner at 20% density on the whole area of the paper.
Black20% Outputs black toner at 20% density on the whole area of the paper.
After you output the test results, contact Dell.
Testing "TonerPalletCheck" or "ContaminationChk"
"Toner Pallet Check" and "ContaminationChk" are used to diagnose machine problems.
On the Customer Mode menu, go down to TonerPalletCheck or ContaminationChk, and press . 1.
TonerPalletCheck Allows you to identify the problem with the toner when print quality problems occur
while printing pictures or photos.
ContaminationChk Allows you to check for any regular lines or spots when printing if print quality
problems are occurring.
After you output the test results, contact Dell.
Change the ECM Mode
You can enable or disable the ECM mode.
On the Customer Mode menu, go down to Fax/Scanner Dialog
Parameter Fax
Parameter Capability ECM , and then press .
Enable
* Enables the ECM mode.
Disable Disables the ECM mode.
Clear NVRAM
You can restore the original factory default menu settings by initializing NVRAM.
Press until >SETUP appears, and then press . 1.
Press until >Admin Menu appears, and then press . 2.
Press until >Maintenance appears, and then press . 3.
4.
5.