Dell 3115cn Color Laser Printer User Manual
Page 159
a.
Right-click Wireless Network Connection and select Properties .
b.
Select Wireless Network tab.
c.
Ensure that the check box for Use Windows to configure my wireless network settings is
checked.
d.
Click Advanced .
e.
Do either of the following:
f.
When wireless ad-hoc mode is set to the multifunction printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the multifunction printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Click Add to display Wireless network properties .
g.
Enter the setting that you send to the multifunction printer and click OK .
h.
Click Move up to move the setting to the top of the list.
i.
Click OK to close the Property dialog box.
j.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to
the manual of the wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
Open Control Panel .
a.
Select Network and Internet .
b.
Select Network and Sharing Center.
c.
Select Connect to a network .
d.
Select the setting you send to the multifunction from the network items listed in Connect to a
network .
e.
Select Connect Anyway in the warning dialog box indication indicating you are entering an
unsecured area.
f.
Click Close in the dialog box after confirming the connection is a success.
g.
For Windows Server 2008:
Open Control Panel .
a.
b.