Microphone mixing, Before connecting a microphone, 3 adjust the volume and tone of the source – Sony AIWA NSX-V50 User Manual

Page 48: 5 adjust the echo with the digital echo control, To record microphone sound mixed with source sound, Recommended microphone

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

KARAOKE

MICROPHONE MIXING

Two microphones can be connected to this unit, allowing you to

sing along to music sources.

Use a microphone with a mini plug (03.5 mm, Ve inches).
NSX-V51G: Microphone is supplied.
NSX-V50A/52A/54: Microphone is not supplied.

Before connecting a microphone

Set the MIC MIXING control to MIN.

1 Connect your microphone(s) to the MIC 1 or MIC

2 jack.

2 Press one of the function buttons to select the

source to be mixed, and play the source.

3 Adjust the volume and tone of the source.

4 Adjust the microphone volume with the MIC

MIXING control.

The volume of both microphones is adjusted simultaneously.

5 Adjust the echo with the DIGITAL ECHO control.

To record microphone sound mixed with source sound

Follow the procedure for recording from the source (pages 36 to

38).
The SYNC DUB button cannot be used for mixing recording.

When not using the microphones

Set the MIC MIXING and DIGITAL ECHO controls to MIN and

remove the microphones from the MIC jacks.

• When a connected microphone is used, the FRONT

SURROUND system is automatically canceled.

• If the microphone is held too near the speakers, a howling sound

may be produced. In this case, hold the microphone away
from the speakers, or decrease the sound level using the MIC
MIXING control.

• If sound through the microphone is extremely loud, it may be

distorted. In this case, turn the MIC MIXING control toward

MIN.

Recommended microphone

The use of a unidirectional type microphone is recommended to

prevent howling. Contact your local Aiwa dealer for details.

48

Advertising