CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 116)

Link OAM 9145EMP NID Software User’s Manual
OAM Peer Information
101
9.2 OAM Peer Information
The OAM Peer Information screen (Figure 9-3) displays information about the OAM peer for a
particular Ethernet-like interface. Each screen contains Link OAM status and configuration for
two ports.
OAM entities communicate with a single OAM peer entity on Ethernet links on which OAM is
enabled and operating properly. There is one entry in this table for each port for which
information on the peer OAM entity is available.
The OAM Peer Information screen displays details about OAM Peer Status, OAM Peer MAC
Address, OAM Peer Vendor, OAM Peer Vendor Info (Hex), OAM Peer Mode, OAM Peer Max
PDU Size, OAM Peer Config Revision, and OAM Peer Functions Supported.
From the Link OAM screen, select OAM Peer Information (2) and press Enter. The OAM Peer
Information screen (Figure 9-3) opens. To navigate to different ports, use the (N)ext and
(P)revious commands. Press Esc to return to the Link OAM menu.
Figure 9-3 OAM Peer Information screen
Canoga Perkins Corp. Ethernet Network Interface Device 21-MAR-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
-----------------------------------OAM PEER INFORMATION------------------------
Net1 Port Net2 Port
OAM Peer Status Active Inactive
OAM Peer MAC Address 00-40-2A-04-12-E8 Unavailable
OAM Peer Vendor OUI 00-40-2A Unavailable
OAM Peer Vendor Info (Hex) 91450711 Unavailable
OAM Peer Mode Active Unknown
OAM Peer Max PDU Size 1518 Unavailable
OAM Peer Config Revision 2 Unavailable
OAM Peer Functions Supported Unidirectional Unavailable
Loopback
Link Events
Press (N)ext, (P)rev or ESC to return to previous screen
------------------------------------Messages-----------------------------------