4 maintenance associations, 1 display maintenance associations, 2 create a maintenance association – CANOGA PERKINS 9145EMP NID Software Version 4.0 User Manual
Page 157
![background image](/manuals/651395/157/background.png)
9145EMP NID Software User’s Manual
Service OAM
Maintenance Associations
142
11.4 Maintenance Associations
Maintenance Associations (MAs) are applicable to 802.1ag procedures. An MA is a set of
Maintenance Association End Points (MEPs), each configured with the same Maintenance
Association Identifier (MAID) and MD Level, that verifies the integrity of a single service instance.
Up to 256 MAs and MEGs can be configured in a 9145EMP NID.
11.4.1 Display Maintenance Associations
To display a list of existing Maintenance Associations, on the SOAM Configuration screen
(Figure 11-6), type 3 and press Enter. The Maintenance Association List screen (Figure 11-12)
opens.
Figure 11-12 Maintenance Association List screen
11.4.2 Create a Maintenance Association
NOTE: Before you configure a new MA, the corresponding VLAN multiplexing record must
already exist.
1. On the Maintenance Association List screen (Figure 11-12), type A and press Enter. The
Create a New Maintenance Association screen (Figure 11-13) opens. The first field, MD
ID, is highlighted.
2. Type an MD ID and press Enter. (To view a list of MDs, press CTRL-L, type S to select,
and press Enter.) The MA ID field is highlighted. Each MA belongs to a single MD.
3. Type an MA ID and press Enter. The Name field is highlighted.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
-------------------------MAINTENANCE ASSOCIATION LIST--------------------------
MA ID LEV NAME VLAN VLAN VLAN
MUX TYPE LIST
26 1 NAMED MA 191 C-Tag 102
27 1 MA2_7 201 C-Tag 103
28 1 MA2_8 102 C-Tag 104, 105 ..
31 2 MA3_1 202 C-Tag 101
32 2 MA3_2 202 S-Tag 202
33 2 MA3_3 203 S-Tag 203
34 2 MA3_4 204 S-Tag 204
35 2 MA3_5 201 S-Tag 201
37 2 MA3_7 201 C-Tag 103
38 2 MA3_8 201 C-Tag 104
41 3 MA4_1 NONE None N/A
Select [(F)irst, (P)rev, (N)ext, (L)ast] to change pages,
(A)dd new, (D)elete, (E)dit, ESC to return:
------------------------------------Messages-----------------------------------