CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 210)

Configuring EVC 9145EMP NID Software User’s Manual
EVC Configuration
195
4. To return to the Tagged Packet Classifier Configuration screen, press Esc.
Figure 12-12 User Port Tagged Packet Classifier Mapping (C-VID Mode)
12.2.4 Display EVC Statistics
EVC statistics can be displayed in both raw and current mode. Press CTRL-T to toggle between
the two modes.
1. On the EVC Record List screen (Figure 12-2), type S and press Enter. The current EVC
Record is highlighted.
2. Press the Space bar to scroll through the list and highlight the record for which you want
to display statistics.
3. Press Enter to select a highlighted record. The EVC Record Statistics screen (Figure 12-
13) opens.
4. To view raw statistics (Figure 12-14), press CTRL-T.
5. To reset all counters, type R and press Enter.
6. Press Esc to return to the EVC Record List screen.
Canoga Perkins Corp. Ethernet Network Interface Device 20-MAR-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
----------- USER PORT TAGGED PACKET CLASSIFIER MAPPING (C-VID MODE) ------------
1) Port: USR1 Page 1 of 103 Total 4094 entries
C-VID <=> Queue C-VID <=> Queue C-VID <=> Queue C-VID <=> Queue
--------------- --------------- --------------- ---------------
(PTAG)<=> Q2
1 <=> Q3 11 <=> Q3 21 <=> Q3 31 <=> Q3
2 <=> Q3 12 <=> Q3 22 <=> Q3 32 <=> Q3
3 <=> Q3 13 <=> Q3 23 <=> Q3 33 <=> Q3
4 <=> Q3 14 <=> Q3 24 <=> Q3 34 <=> Q3
5 <=> Q3 15 <=> Q3 25 <=> Q3 35 <=> Q3
6 <=> Q3 16 <=> Q3 26 <=> Q3 36 <=> Q3
7 <=> Q3 17 <=> Q3 27 <=> Q3 37 <=> Q3
8 <=> Q3 18 <=> Q3 28 <=> Q3 38 <=> Q3
9 <=> Q3 19 <=> Q3 29 <=> Q3 39 <=> Q3
10 <=> Q3 20 <=> Q3 30 <=> Q3 40 <=> Q3
2) Modify assignment
3) Go to C-VID
Select [1-3]:
CTRL-D: page down, CTRL-U: page up
------------------------------------Messages-----------------------------------