CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 154)

Service OAM 9145EMP NID Software User’s Manual
Maintenance Domains
139
11.3.1 Display Maintenance Domains
To display a list of existing Maintenance Domains, on the SOAM Configuration screen (Figure 11-
6), type 2 and press Enter. The Maintenance Domain List screen (Figure 11-9) opens.
Figure 11-9 Maintenance Domain List screen
11.3.2 Create a Maintenance Domain
1. On the Maintenance Domain List screen (Figure 11-9), type A and press Enter. The
Create a New Maintenance Domain screen (Figure 11-10) opens. The first field, MD ID, is
highlighted.
2. In the MD ID field, type a number between 1 and 65535 and press Enter. The Level field
is highlighted.
3. In the Level field, type a number between 0 and 7. Higher numbers correspond to higher
Maintenance Domains, those with the greatest physical reach; for example, the highest
level corresponds to customers' CFM packets. Lower numbers correspond to lower
Maintenance Domains, those with more limited physical reach; for example, MDs at level
0 usually cover single physical links. Press Enter. The Name Field is highlighted
4. In the Name field, type the name of the new domain and press Enter. (You can also
configure an MD without a name. See, for example, MD ID 2 in Figure 11-9). The
Permissions (Sender ID) field is highlighted.
5. In the Permissions (SenderID) field, select Chassis, Manage, ChassisManage, or None
and press Enter. This value indicates what is to be included in the Sender ID TLV
transmitted in CCMs, LBMs, LTMs, and LTRs:
• None: The Sender ID TLV is not sent. This is the default value.
• Chassis: the Chassis ID Length, Chassis ID Subtype, and Chassis ID fields of the
Sender ID TLV are sent
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
-------------------------MAINTENANCE DOMAIN LIST-----------Display 1 - 3 of 3-
MD ID NAME LEVEL
1 Domain 1 (service) 3
2 0
5 MD5 () 5
Select [(F)irst, (P)rev, (N)ext, (L)ast] to change pages,
(A)dd new, (D)elete, (E)dit, ESC to return:
------------------------------------Messages-----------------------------------