CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 48)

System Configuration 9145EMP NID Software User’s Manual
Account Configuration
33
7. Allow UI Lockout Of User Gives Supervisors the ability to lock users out of the system.
Press the Space bar to select Yes or No.
8. Allow UI Logout Of User Gives Supervisors the ability to log users off the system. Press
the Space bar to select Yes or No.
9. UI Login Locked State Determines the current state of the UI Login. Press the Space
bar to select Locked or Unlocked.
10. SNMPv3 Authentication Protocol Sets the authentication protocol for SNMPv3 access.
Press the Space bar to select None, MD5, or SHA.
11. SNMPv3 Authentication Password Used to enter the SNMPv3 authentication
password. This password is not stored. It is used to generate the SNMPv3 authentication
key. Type the desired password and press Enter. Reenter the password. The password is
required to be between 8 and 15 characters. This field will be passed over if the SNMPv3
authentication protocol is set to None.
SNMPv3 Authentication Key Displays the computed SNMPv3 authentication key. This
is a field that is shared with an SNMPv3 management application to allow authenticated
protocol exchanges.
12. SNMPv3 Privacy Protocol The privacy protocol used for SNMPv3 access. Press the
Space bar to select None or DES.
13. SNMPv3 Privacy Password Used to enter the SNMPv3 privacy password. This
password is not stored. It is used to generate the SNMPv3 privacy key. Type the desired
password and press Enter. Reenter the password. The password is required to be
between 8 and 15 characters. This field will be passed over if the SNMPv3 Privacy
Protocol is set to None.
SNMPv3 Privacy Key Displays the computed SNMPv3 privacy key. This is a field that
must be shared with an SNMPv3 management application to allow private SNMPv3
protocol exchanges.
3.4.4 Delete an Account
NOTE: An account cannot be deleted while the user is logged in. In addition, you cannot delete
the last supervisor account.
Before attempting to delete an account make sure the user is logged out. Use the following
procedure to delete an account.
1. To delete an account, from the Account Configuration screen (Figure 3-17), type D and
press Enter. The first User Account will be highlighted.
2. Press the Space bar to scroll through the user names to select the account. Press Enter
to delete the highlighted account.
3. When deletions are completed, press Esc to return to the System Configuration menu.