6 link aggregation – CANOGA PERKINS 9145EMP NID Software Version 4.0 User Manual
Page 85
9145EMP NID Software User’s Manual
Port Information
Link Aggregation
70
5.6 Link Aggregation
The 9145EMP supports Link Aggregation (LAG) as a link protection mechanism on Network
ports. Only one LAG group is configured in the system, labeled LAG 1. Only Network ports can
be assigned to the LAG. Moreover, if the LAG mode is enabled on the network side, then traffic
cannot be sent on individual Network ports.
To configure LAG or view LAG Statistics, from the Port Information screen (Figure 5-1), select
Link Aggregation (6) and press Enter. The Link Aggregation Main Menu (Figure 5-17) opens.
Figure 5-17 Link Aggregation Main Menu
Canoga Perkins Corp. Ethernet Network Interface Device 21-MAR-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
---------------------------LINK AGGREGATION MAIN MENU---------------------------
1) LAG Configuration
2) LAG Statistics
Select [1-2]:
------------------------------------Messages-----------------------------------