CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 55)

9145EMP NID Software User’s Manual System Configuration
Hardware Information
40
3.9 Hardware Information
The Hardware Information screen displays the model number of the 9145EMP, hardware revision
level, serial number, power supplies, and port information.
From the System Configuration menu, select Hardware Information (9) and press Enter. The
Hardware Information screen (Figure 3-23) opens.
To display User port 4, Net 1, Net 2 (Figure 3-24), type M and press Enter. SFPs will be detected
for the network ports, even if one network port is disabled.
NOTE: Parameters and values cannot be changed in this screen.
Figure 3-23 Hardware Information screen - 1 of 2
Canoga Perkins Corp. Ethernet Network Interface Device 17-MAR-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
-----------------------------------HARDWARE INFORMATION---------Display 1 of 2-
NID Model Number 9145EMP-761-0-0
NID Hardware Rev. 22
NID Serial Number 20100410780
SFP Information User Port 1 User Port 2 User Port 3
Model Number SFP1-0045 SFP1-0045 SFP1-0045
Wavelength 850nm MM 850nm MM 850nm MM
Connector Type Duplex LC Duplex LC Duplex LC
Data Rate 1000Mbps 1000Mbps 1000Mbps
Maximum Line Length N/A N/A N/A
Maximum Loss Budget 7.5dB 7.5dB 7.5dB
MAC address 00:40:2A:04:E5:83 00:40:2A:04:E5:84 00:40:2A:04:E5:85
Power Supply AC 120/240
Select [(M)ore ], ESC to return to previous screen
----------------------------------Messages-------------------------------------