CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 184)

Service OAM 9145EMP NID Software User’s Manual
Maintenance Intermediate Points
169
Figure 11-35 Create a New Maintenance Intermediate Point screen (Y.1731)
11.7.3 Delete a Maintenance Intermediate Point
When you delete a Maintenance Intermediate Point, it is also deleted from the AIS client lists.
1. On the Maintenance Intermediate Point List screen (Figure 11-33), type D and press
Enter. The current MIP is highlighted.
2. Press the Space bar to scroll through the list and highlight the entry you wish to delete.
3. Press Enter to delete the highlighted MIP. You are prompted to confirm the deletion.
11.7.4 Modify a Maintenance Intermediate Point
1. On the Maintenance Intermediate Point List screen (Figure 11-33), type E and press
Enter. The current MIP is highlighted.
2. Press the Space bar to scroll through the list and highlight the entry to modify.
3. When the MIP you want to modify is highlighted, press Enter. The Maintenance
Intermediate Point Attributes screen for that MIP (Figure 11-36 for 802.1ag or Figure 11-
37 for Y.1731) opens.
4. To change the Admin Status, type 1 and press Enter. Select Enabled or Disabled and
press Enter. When a MIP is disabled, it does not process any requests it receives.
5. For 802.1ag, to view the VLAN list for that MIP, type 2 and press Enter. The MIP’s
Maintenance Association List opens. If you are configuring a Y.1731 MIP, the VLAN
number is displayed on the screen.
6. If you are configuring an 802.1ag MIP, type A to accept the settings and press Enter.
Press Esc to return to the Maintenance Intermediate Point Attributes screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
-----------------CREATE A NEW MAINTENANCE INTERMEDIATE POINT--------------------
1) MEG ID 0
2) MIP ID: 0
3) Admin status: Disabled
Select [1-3] for attributes:
------------------------------------Messages-----------------------------------