CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 214)

Bandwidth Profiling 9145EMP NID Software User’s Manual
Bandwidth Profiles
199
Chapter 13
Bandwidth Profiling
This chapter describes the Ethernet Traffic engineering features available in this release of the
9145EMP.
13.1 Bandwidth Profiles
A bandwidth profile is a passive entity that characterizes a certain traffic flow. The entity is
passive because, by itself, a bandwidth profile does not affect the traffic in any way; it must be
attached to a policer or a shaper in order to produce effects on the traffic.
A bandwidth profile record contains:
• A unique numerical identifier, between 1 and 4096; the profile is associated with a shaper
or policer using this numerical identifier.
• A name, for your reference.
• A bandwidth profile type, either a policing profile or a shaping profile.
• Committed Information parameters:
• Committed Information Rate (CIR) is expressed in kilobits (kbits) per second. It
defines the average rate in kbits of service frames up to which the network deliv-
ers and meets the performance objectives defined by the CoS Service Attribute.
CIR must be greater than or equal to 0. When CIR equals 0, it indicates a “best
effort” profile.
• Committed Burst Size (CBS) is expressed in kilobytes (kbytes). CBS limits the
maximum number of kbytes available for burst frames sent at the line speed to
remain CIR-conforrmant. This represents the maximum number of tokens in the
CIR token bucket.