Yamaha HTR-5860 - Manual (Page 11)

CONTROLS AND FUNCTIONS
® SLEEP
Sets the sleep timer.
® MULTI CH IN
Selects multi-channel input when using an external
decoder (etc.).
0 AMP
Selects the AMP mode. You must select the AMP mode to
control the main unit.
© VOLUME +/-
Increases or decreases the volume level.
© MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level.
© NIGHT
Turns on or off the night li.stening modes (.see page 35).
© STRAIGHT (EFFECT), ENT*
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
© SET MENU, SRCH MODE*
Activates the SET MENU function.
* Available only when the unit is in the XM Salcllile Radio
mode (see page 45 ).
Using the remote control
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
Handling the remote control
Do not spill water or other liquids on the remote
control.
Do not drop the remote control.
Do not leave or store the remote control in the
following types of conditions:
- places of high humidity, such a.s near a bath
~ high temperature, such as near a heater or stove
- extremely low temperatures
- dusty places