Selecting sound field programs, I front panel operation, Rotate program to select the desired program – Yamaha HTR-5860 User Manual
Page 36: Remote control operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLAYBACK
Selecting sound field programs
I Front panel operation
Rotate PROGRAM to select the desired program.
The name of the selected program appears in the front
panel display and video monitor.
PROGRAM
p o r t s
Program name
Remote control operation
"i i-T!.r
AMP
ii
Sound Held
program
buttons
Press AMP to select the AMP mode, then press
one of the sound field program buttons to select
the desired program.
The name of the selected program appears in the front
panel display.
-.1
■;0 ty . -
.
I
.
"
v
j
‘
.. t .■ ".y.ior j
i f t s ,
Program name
Choose a sound field program based on your listening preference,
and not on the name of the program.
Notes
When you select an input source, this unit automatically selects
the last sound field program used with that source.
Sound field programs cannot be selected wdicn MULTI CH
INPUT is selected.
Sampling frequencies higher than 48 kHz (except for DTS 96/
24 signals) will he sampled down to 48 kHz, then sound field
programs wall he applied.
32