Yamaha HTR-5860 - Manual (Page 35)

PLAYBACK
Select a sound field program if desired.
Use PROGRAM (or press AMP to select the AMP
mode, then press one of the sound field program
buttons) to select a sound field program. See page 55
for details about sound field programs.
: AMP :
PROaRAIVS
Front panel Remote control
■ To listen with headphones (“SILENT
CINEMA”)
“SILENT CINEMA” allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
surround, through ordinary headphones. “SILENT
CINEMA” activates automatically whenever you connect
headphones to the PEIONES jack while listening to
CINEMA DSP or HiFi DSP sound field programs. When
activated, the “SILENT CINEMA” indicator lights up in
the front panel display.
Notes
TONE CONTROL
• This unit will not be set to “SILENT CINEMA” when MULTI
CH INPUT is selected as the input source.
• “SILENT CilNEMA” is not effective when PURE DIRECT or
the 2ch Stereo program is selected, or in STRAIGHT mode.
■ To adjust the tone
You can adjust the tonal quality
of your front left and right,
center, and subwoofer speakers or
headphones (when connected).
Press TONE CONTROL on the
front panel repeatedly to select
TREBLE or BASS, then rotate
PROGRAM to the right or left to
increase or decrease.
• Select TREBLE to adjust the
high frequency response.
• Select BASS to adjust the low'
frequency response.
s'i'i
Speaker and headphone adjusimenls are stored independently.
PROGRAM
Notes
• TONE CONTROL is not effective during playback in the
PURE DIRECT mode, or when MULTI CH INPUT is selected
(page 31).
• When TONE BYPASS is set to “AUTO" (page 67), and BASS
and TREBLE are set to 0 dB, audio output automatically
bypasses this unit's tone control circuitry.
■ To mute the sound
Press MUTE on the remote control.
The MUTE indicator flashes in the
front panel display.
To resume the audio output, press
MUTE again (or press VOLUME -/+).
The MUTE indicator disappears from
the display.
You can adjusl the muting level (see page 67).
■ Selecting MULTI CH INPUT
Press MULTI CH INPUT (or MULTI CH IN on the
remote control) so that “MULTI CH INPUT” appears in
the front panel display and video monitor.
Front panel Remote control
t
■■■•I i T i. ini i'
Note
When "MULTI CH INPUT” is shown in the front panel display,
no other source can be played. To select another input source with
INPUT (or one of the input selector buttons'), press MULTI CH
INPUT (or MULTI CH IN on the remote control) to turn off
"MULTI CH INPUT" in the front panel display.
■ Playing video sources in the
background
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Use the input selector buttons on the remote
control to select a video source, then select an
audio source.
_ Audio sources
Video sources
Note
If you w'ant to enjoy audio from the MULTf CH INPUT jacks
together w'ith a video source, first select the video source, then
press MULTI CH INPUT (or MULTI CH IN on the remole
control
i.
31