Yamaha HTR-5860 - Manual (Page 77)

ADVANCED SETUP MENU
■ ADVANCED SETUP menu Items
Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Speaker impedance SF' IrllC,
Use to switch the speaker impedance for this unit.
Choices: 8
Q MIN, 4 Q MIN
• Select 8 D MIN to set the speaker impedance to 8 fi .
• Select 4
Q MIN to set the speaker impedance to 4 Q .
,.H.. IVI I ) ! f... Remote
Use to switch the ID for the remote control of this unit.
Choices:
ID1, ID2
• Select ID I to operate this unit using the default code.
• Select ID2 to operate this unit using an alternative
code.
Note
You must also make settings for the remote control (see page 77).
SP IMP. Speaker Impedance level
4 Q MIN
Front
If you use one set (A or B).
the impedance of each
speaker iniisl be 4 Q or
higher.
If you use two sets (A and
B )> the impedance of each
speaker miisl be 8 Q or
higher.
Center
The impedance of each
speaker must be 6 or
higher.
Surround
Surround back
8 Q MIN
Front
If you use one set (A or B).
the impedance of each
speaker must be 8 or
higher.
If you use two sets ( A and
B), the impedance of each
speaker miisl be 16 or
higher.'“
Center
The impedance of each
speaker must be 8 Q or
higher.
Surround
Surround back
■’ The Canada model cannot use two separate speaker systems
(A and B) simultaneously when SP IMP. is set to the 8 O MIN
position.
Factory presets FlfEdolEl"
Use to reset all parameters to the factory presets (see
page 90).
Choices:
CANCEL RESET
• Select CANCEL if you do not want this unit’s
parameters to be initialized when you reset the factory
presets.
• Select RESET if you want all of this unit’s parameters
to be initialized when you reset the factory preset.s.
Note
This setting does not affect ADVANCED SETUP menu item
parameters.
73