Canceling the sleep timer, Manually adjusting speaker levels, 1 press amp – Yamaha HTR-5860 User Manual
Page 63: 3 press < / > to adjust the speaker output level
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADVANCED OPERATIONS
■ Canceling the sleep timer
Press SLEEP repeatedly until '‘SEEEP OFF” appears in
the front pane! display.
After a few seconds, “SEEEP OFF” disappears, and the
SLEEP indicator coes off.
SLEEP
The
sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANE)BY/ON on tire front
panel) lo set this unit to the standby mode.
Manually adjusting speaker levels
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing .sources through the MULTI CH INPUT jacks.
Please note that this operation will override the level
adjustments made in “AUTO SETUP” (page 24),
“SPEAKER LEVEL” (page 65).
"
■3
1
Press AMP.
2
Press LEVEL repeatedly to select the
speaker you want to adjust.
•''! I !
r k j T
l m
D
l - . J I !
j
Front left speaker level
Center speaker level
Front right speaker level
Surround right speaker level
Surround back right speaker level
Surround back left speaker level
Surround left speaker level
Subwoofer level
Presence left speaker level
Presence right speaker level
Once you press LEVEL, you can also select the speaker by
pressing as / v-.
3
Press < / > to adjust the speaker output level.
The control range is from +10 dB to -10 dB.
4
Press ENTER when you have completed your
adjustment.
This operation can also be performed using the controls on the
front panel. Press NEXT repeatedly to select the speaker you
want to adjust, then press LEVEL-/+ to adjust the output level.
59