Yamaha HTR-5860 - Manual (Page 34)

PLAYBACK
Basic operations
(U.S.A. model)
4
Select the input source.
Rotate INPUT (or press one of the input selector
buttons on the remote control) to select the input you
desire.
I: :■(../
Front panel
Remote control
1 3
1=
The current input source name and input mode appear
in the front panel display and video monitor for a few
seconds.
.;N:
■ e
DVRATCRJ VCfil V-AUX OTV/CBl DVD ’ MfcCD-R TUNED CD PHONO
4-H' : } ‘ \
i '
n l j r , . P i ! i n . "bi
- - -
^ .— s yiiv -Ui',-'
Selected input source Input mode
1
Press STANDBY/ON (or SYSTEM POWER on
the remote control) to turn on the power.
1
Front panel Remote control
2
Turn on the video monitor connected to this
unit.
3
Press SPEAKERS A or B (or press AMP to
seiect the AMP mode, then press SPEAKERS
A or B on the remote control).
Each press turns the respective speakers on or off.
SPEAKERS
L.AME_J
A SPtejtEHS B
Front panel Remote control
5 start playback or select a broadcast station
on the source component.
Refer to the operating instructions for the component.
6 Adjust the volume to the desired output level.
+
Remote control
30