Yamaha HTR-5860 - Manual (Page 8)

Front panel
CONTROLS AND FUNCTIONS
O
STANDBY/ON
Turns on this unit or sets it to the standby mode. When you
turn on this unit, you will hear a click and there will be a 4
to 5-second delay before this unit can reproduce sound.
Note
In standby mode, this unit consumes a small amount of power in
order to receive infrared-signals from the remote control.
o PURE DIRECT
Turns on or off PURE DIRECT mode (see page 34).
0 Remote control sensor
Receives signals from the remote control.
O Front panel display
Shows information about the operational status of this
unit.
0 PRESET/TUNING (EDIT), SEARCH MODE
Switches the function of PRESET/TUNING/CH <1 / >
(LEVEL
-!+)
between selecting preset station numbers
and tuning.
0 FM/AM,XM*
Switches the reception band when the unit is in tuner
mode.
0 A/B/C/D/E, NEXT, CATEGORY*
Selects one of the 5 preset station groups (A to E) when
the unit is in tuner mode.
Selects the speaker channel to be adjusted when the unit is
not in tuner mode.
0 PRESET/TUNING/CH <] />, LEVEL-/+
Selects preset station number 1 to 8 when the colon (:) is
displayed next to the band indication in the front panel
display when the unit is in tuner mode. Selects the tuning
frequency when the colon (:) is not displayed.
Adjusts the level of the speaker channel selected using
A/B/C/D/E (NEXT) w,hen the unit is not in tuner mode.
0 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory. Hold down this button for
more than 3 seconds to start automatic preset tuning.
0 TUNING MODE (AUTO/MAN’L MONO),
DISPLAY*
Switches the tuning mode between automatic (AUTO
indicator on) and manual (AUTO indicator off).
0 VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.